Grandview GPCM-E Bedienungsanleitung PDF herunterladen

Instruction Manual

GRANDVIEW REPRODUCING GENUINE COLORS

Projector ceiling mount

with high precision

adjustment

Applicable Model

GPCM-E3540

GPCM-E4560

Please read before using

Thank you for purchasing our

products. Please read the

instruction manual carefully

in order to ensure this

projector lift is suitable for

your projection equipment.

Cautious

Warnings

For safety, the minimum of ceiling must be 20KGweight

Caution

Please do not incline the projector extremely.

Please do not take apart the accessories of projector

ceiling mount.

Do not

take apart

Height Adjustment

Take apart the ornament cap of main bar (2-3) and loosen the front

positioning screws. Adjust the subsidiary bar (2-3) to reqiured

position, and then install the ornament cap of main bar (2-3) as figure

figure 9

vertical tilt:±15°

The angle of

The nagle of

horizontal tilt:±8°

Rotation:360°

Angle Adjustment

1.Vertical adjustment: rotate the adjusting button (3-3) for vertical

angle, figure 10

2.Horizontal adjustment: rotate the adjusting button (3-2) for

horizontal angle, figure 11

3.Horizontal rotation adjustment: loosen the rotation adjusting screw

(3-4), the installation base can be rotated by 360°;fasten the rotation

adjusting screw (3-4) after deciding the angle,figure 12

figure 10 figure 11

figure 12

Installation of main bar

1.Firstly, please confirm how many installation holes the projector has?

3 or 4

2.If there are 3 holes, the installation arms (4-2) need to be taken apart

from Installation bracket firstly. Connect 3 installation arms(4-2) to the

projector, and then connect the installation arms (4-2) to the installation

base (4-5) However,the installation base needs to be the center of

projector. Figure 13.

3.Connect the installation arms to the projector conversely if the

distance of installation holes is less than 120mm. Connect the

installation arms (4-2) to the installation base (4-5) via sliding

installation button (4-4) as figure 14

4.Rotate the adjustable screw (4-3) for adjusting the height of instllation

arms (4-2) if the installation holes are not at the same level as figure 15

5.The front or back of adjuster must be parallel to the surface of

projector as figure 16

The front or back of

adjuster must be

parallel to the surface

of projector

figure 13

figure 14 figure 15

figure 16

Scope of

adjustment: 10mm

Grandview Crystal

Screen Canada Ltd.

#11- 3751 North Fraser Way,

Marine Way Business Centre,

Burnaby, BC, Canada V5J 5G4

Tel: 1-604-412-9777

Fax: 1-604-412-9796

Website: www.grandviewscreen.ca

Guangzhou Grandview

Crystal Screen Co., Ltd.

P.O. 511400 Federal Ind. Zone No. 363,

Yushan West Road,Shiqiao, Panyu

District, Guangzhou, Guangdong, China

Tel: +8620-8489-9499

Fax: +8620-8480-3343

Website: www.grandviewscreen.com

Details of installation

1 2

Instruction Manual 1

Inhaltsverzeichnis

Seite 1 - Instruction Manual

Instruction ManualGRANDVIEW REPRODUCING GENUINE COLORSProjector ceiling mount with high precision adjustmentApplicable ModelGPCM-E3540GPCM-E4560Ple

Seite 2

Install the fixation on the ceiling (screws of accessory ① ) as figure 1. GPCM-E can be installed to the concrete-roof with ceiling or wi

Kommentare zu diesen Handbüchern

Keine Kommentare

Grandview GPCM-E Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Drucker Grandview GPCM-E herunter. Grandview GPCM-E User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucker Grandview GPCM-E